In the right circumstances, the concern is that ethanol absorbs enough water to cause ‘phase separation’, where the ethanol/water mixture separates from the petrol and sinks to the bottom of the tank. Used properly they prevent gasoline from breaking down and it can be left in gas tanks, vehicles, or small engines. Consider if there is any fairing or plastic panelling which may need loosened to allow the tank to lift at the rear. Lawnmowers, carburetor, small and large engines, motorbikes, as well as generators and snow blowers.

Fuel Stabilizer for Motorcycles: Keeping Fuel Fresh Fuel Stabilizer for Motorcycles: Keeping Fuel Fresh

When you take these precautions, your fuel will remain stable and at its best for the long run; don’t wait, get your fuel stabilizer now. You can avoid rust and other damage to your bike if you fill your gas tank with fuel and add a fuel stabilizer before storing it. Should I be putting the stabilizer in and then driving for 10 minutes to the storage area (to run it through the system) OR should I wait until I get to the storage area, and just run the bike stationary for one minute?

Employing a super-concentrated fuel system cleaner additive that combines the innovative PEA technology, the 104+ Fuel Injector Pro is the unparalleled fuel injector cleaner in the auto market. The UK is arguably lagging behind with the introduction of E10 fuel, with most of Europe, and indeed much of the world, using E10 as standard in their pumps. Unleaded fuel is the best choice for motorcycles because it provides the best performance and efficiency, so use it wisely to ensure that your motorcycle has the best life possible.

Motorcycle Fuel Stabilizers and Short-Term Storage | Rider

As an anti-expiry solution, fuel stabilizer will keep your gasoline in your tank fresh for longer than if it were not. Engineered to enhance its multifunctional additive characteristic, the Star Tron Enzyme Treatment Concentrate employs an innovative and highly active enzyme capable of kick-starting your engine smoothly over the long course. One 20-ounce can treats up to 20 gallons of fuel and the company recommends using it every annually or every 10,000 miles.

One is that pure ethanol, being alcohol, is hygroscopic – it attracts water, even pulling it out of the air around it – unlike petrol, which separates from water. If the gas in the engine of a motorcycle is not properly stabilized, it can begin to fail in as little as 30 days. Because fuel stabilizer is a hydrophobic (repels water molecules) product, it is intended to bind to gasoline in your tank and prevent it from collecting H20. Fuel Ox, for example, can keep your fuel fresh for up to 24 months, depending on the storage conditions, making it an excellent example of a fuel stabilizer.

Putoline Fuel Stabliser 325ml | FREE UK DELIVERY | Flexible Putoline Fuel Stabliser 325ml | FREE UK DELIVERY | Flexible

Unlike what many people think, a fuel stabilizer cannot fix old gasoline that has already been contaminated with water and become stale.It is not a good idea to use a fuel stabilizer on stainless steel parts or engines that do not use ethanol. You will need, cleaning cloths, spark plug wrench, a trickle battery charger, four or five quarts of high quality oil, new oil filter, oil can or device to get oil in the cylinders, chain lube (if you have a chain drive), fuel stabilizer, spray can of WD40, a breathable motorcycle cover, kitchen plastic wrap, rubber bands, vinyl or plastic gloves, items to clean and wax your bike. While most riders understand the importance of using the right type of fuel, they may not be aware of the need to use fuel stabilizers.

Mountfield MS1220 Universal Fuel Stabiliser 250ml - Screwfix Mountfield MS1220 Universal Fuel Stabiliser 250ml - Screwfix

Using the fuel stabilizer before storing the motorbike will help to make the motorbike gas fresh for the entire period. But if you use a fuel stabilizer, you can keep your fuel fresh, properly balanced, and perfectly stable with no evaporation — and no left-behind deposits in your engine. If you ride an older bike this may cause issues, but most modern machines are perfectly capable of running on E10.

There are others, but we lean toward these simply because they include motorcycles in their literature and FAQs and that gives us a warm, fuzzy feeling. However, using a fuel stabilizer is optional if your motorbike comes with a stainless steel or anti-corrosion feature.